HNST WELCOME! 0755-23173910
English  |中文
你当前的浏览器版本过低或不支持。请升级或更换浏览器。推荐浏览器 Chrome Edge。

CRH0603F1R60P05Z: A 0603 1.6R 0.125W EVER OHMS Resistor — Parameters, Positioning, and Engineering Trade-offs

The first specification worth noting on the CRH0603F1R60P05Z is its 0.125W rating in a 0603 footprint. Part of the EVER OHMS CRH high-power thick-film chip resistor family, it carries a nominal resistance of 1.6Ω with ±1% tolerance and a rated power of 0.125W at 70°C. Standard thick-film 0603 resistors typically stop at 0.1W. That extra 25% margin matters in current-limiting, low-value divider, or low-side sensing positions where derating headroom at elevated ambient temperatures determines whether the design holds up over life.

What the part number encodes

CRH identifies the high-power thick-film series, distinguished from the general-purpose CR family by power density. 0603 is the imperial footprint code (metric 1608), with a body of approximately 1.60mm × 0.80mm. F denotes ±1% resistance tolerance; 1R60 is 1.6Ω; P05Z is the factory power grade and packaging code. The full part number should be used at order entry. F-grade and J-grade (±5%) parts share the same outline, but they are not interchangeable in low-resistance circuits where tolerance directly affects node behavior.

Core electrical parameters of the 0603 1.6R 0.125W EVER OHMS resistor

Using E = √(P·R), the full-power voltage across 1.6Ω at 0.125W is only about 0.447V. Using I = √(P/R), the continuous current at rated power is approximately 279mA. Both figures sit well below the 75V maximum working voltage typical of the 0603 platform, confirming that thermal dissipation, not voltage withstand, is the limiting factor for this 0603 1.6R 0.125W resistor. TCR is ±100ppm/°C, and the operating temperature range extends from -55°C to +155°C, consistent with the CRH series process platform.

Where 1.6Ω fits in a circuit

The 1.6Ω value sits in the low-resistance range, and its circuit role differs meaningfully from higher-ohmic CRH variants. Typical placements include low-side sensing in few-hundred-milliamp loops where a millivolt-level signal is sufficient; LED or optocoupler current limiting on low-voltage rails; RC snubber or damping positions in power modules; and series protection on interface lines where minimum voltage drop is the priority. In these positions, 0.125W is not a continuous full-load capability — it is derating headroom. Above 70°C, thick-film resistors must follow the factory derating curve down to zero usable power at 155°C. A 0.1W part in the same footprint leaves noticeably less room as ambient temperature rises.

How 0.125W fits into a 0603 body

The CRH series does not achieve the higher rating by enlarging the chip. Three process adjustments account for the difference: a resistor paste formulation with higher thermal capacity per unit area, a widened side-electrode structure that shortens the thermal path from the resistive element to the PCB pad, and a densified glass-overcoat layer that limits resistance drift under humid conditions. Board area remains 1.6mm × 0.8mm, so a power upgrade from a 0.1W CR-series part can be done without changing the pad library; reverse substitution, however, requires recalculating actual dissipation against the ambient derating curve.

Availability

Shenzhen Shunhai Technology Co., Ltd. has held first-tier EVER OHMS authorization since 2017, covering the full current-sense resistor and high-power thick-film portfolio through the 2026 authorization term. Huanian Mall, the company’s online self-operated platform, provides live inventory, tiered pricing, and datasheet access with one-piece minimum order, suited to sampling and low-volume prototyping. For production-volume technical support and cost optimization, the Shunhai Technology direct team handles the transition from qualification to recurring supply. The CRH0603F1R60P05Z and sibling CRH 0603 part numbers are available through both channels.

  • Recommended similar products:

    Part Number Parameter
    CRH0603F1K80P05Z 0603 1.8K 0.125W 1%
    CRH0603F1R10P05Z 0603 1.1R 0.125W 1%
    CRH0603F1R20P05Z 0603 1.2R 0.25W 1%
    CRH0603F1R60P05Z 0603 1.6R 0.25W 1%
    CRH0603F2R00P05Z 0603 2R 0.25W 1%
    CRH0603F2R40P05Z 0603 2.4R 0.25W 1%
    CRH0603F348KP05Z 0603 348R 0.25W 1%
    CRH0603F34K8P05Z 0603 34.8K 0.25W 1%
    CRH0603F360RP05Z 0603 360R 0.25W 1%
    CRH0603F390KP05Z 0603 390K 0.125W 1%
    CRH0603F390RP05Z 0603 390R 0.125W 1%

Brand

Product Recommendation

Recommend Article