HNST WELCOME！ 0755-23173910

English |中文

{{searchSelectTypeText}}

Search

Precision resistor fuse SMD fuse Alloy resistance walter current diverter ever ohms

Cart {{cartCount}}

你当前的浏览器版本过低或不支持。请升级或更换浏览器。推荐浏览器 Chrome Edge。

CJL3407,CJ,MOSFETS

CJL3407

MOS ,P-ch ,CJL3407 ,0.35W ,-4.1A ,-30V ,SOT-23-6L

✖

The image is for reference only, please refer to the drawing for details

Product number：	MOS-MPM0480W35M14F3009CJ
Manufacturer Product Number：	CJL3407
Manufacturer ：	CJ
Series ：	CJ-MOS
Product Type ：	MOSFETS
Configuration ：	P-ch
Power Dissipation (PD) ：	0.35W
Continuous Drain Current (ID) ：	-4.1A
Drain-Source Voltage (V) ：	-30V
Package ：	SOT-23-6L
Description：	MOS ,P-ch ,CJL3407 ,0.35W ,-4.1A ,-30V ,SOT-23-6L

Series Introduce Find Similar

Attribute Name	Attribute Value
Manufacturer	CJ
Product Series	CJ-MOS
Product Type	MOSFETS
EU RoHS	Compliant(2011/65/EU)
EU REACH	Dose not contain REACH SVHC(1907/2006/EC)

Series Introduce Find Similar

File

File Type	File Name

Lead time： Estimated delivery date 2026-10-26

Online Inquiry

Product Recommendation Maker Dynamics Applications

Product Recommendation Maker Dynamics Applications

What is MOSFET VDS ringing? VDS ringing refers to the phenomenon where VDS (DC source drain voltage) oscillates when using silicon carbide MOSFETs. This is due to the special working principle of MOSFET, as MOSFET is a switching device that has the ability to change between on and off states.

Voltage polarity and symbol diagram of MOS transistor, N-MOS and P-MOS The following text introduces the symbol rules for N-MOS voltage polarity and P-MOS voltage polarity respectively

1200V SiC MOSFET tested under short-circuit conditions Short circuit capability of 1200 V SiC MOSFET and overcurrent protection solution using ready-made driver IC. Several design considerations were discussed to ensure accurate measurements. The test results indicate that the short-circuit capability of SiC MOSFET is highly correlated with the drain voltage and gate voltage, but not sensitive to the shell temperature and switching speed. By reducing the gate drive voltage or reducing the bus voltage, a longer endurance time can be achieved, but these solutions will lower the performance of SiC MOSFETs.

Comparison of driving circuit differences between SiC MOSFET and Si IGBT SiC MOSFET and Si IGBT are both indispensable products for the development of electronic products. SiC MOSFET and Si IGBT have many common characteristics and differences. Therefore, the following is a comparison of their product differences:

Detailed explanation of reverse recovery principle of silicon carbide (SiC) diode Silicon carbide diodes are unipolar devices, so compared to traditional silicon fast recovery diodes (silicon FRDs), silicon carbide diodes have ideal reverse recovery characteristics. When the device switches from forward to reverse blocking direction, there is almost no reverse recovery power, and the reverse recovery time is less than 20ns. Even the reverse recovery time of 600V10A silicon carbide diodes is less than 10ns.

Can digital signals pass through isolation chips Can digital signals pass through isolation chips? The answer is yes. Digital signals can be transmitted through isolation chips. Isolation chips are mainly used to isolate signals for the purpose of electrical isolation, ground isolation, or optical isolation. Isolation chips typically consist of two parts: isolation front-end and isolation back-end.

Testing and Inspection Methods for Silicon Carbide (SiC) Diodes Silicon carbide (SiC) diodes have low switching losses, high reverse withstand voltage, and thermal stability, and have been widely used. Here are the usage and testing methods for SiC diodes:

MOS transistor as a special driving circuit for switch transistor applications (commutation circuit) MOS transistor is a special driving circuit (commutation circuit) used as a switching transistor. Compared with ordinary transistor, MOS transistor has many advantages. However, when applied as a high-power switch transistor, due to the capacitive input characteristics of MOS transistor, the input terminal of MOS transistor is equivalent to a small capacitor. The input switch excitation signal is actually in the process of repeatedly charging and discharging this capacitor. During the charging and discharging process, the MOS transistor conducts and closes with a lag, which slows down the process of "on" and "off", which is not allowed by the switching element (increased power consumption, burning out the switch transistor).

SiC MOS driver design SiC MOS driver design is a complex process that requires consideration of many factors, such as electrical performance, thermal characteristics, and packaging selection. To improve reliability and performance, the following aspects should be considered:

Silicon carbide (SiC) power devices need to be used in conjunction with pull-down resistors Silicon carbide (SiC) pull-down resistor usually refers to the resistor used in SiC power devices to control the closing speed of the device. In SiC power devices, due to their high-speed switching characteristics and high peak voltage, high peak currents are generated when the control device is turned off, which can cause equipment failure or electromagnetic interference. Therefore, in SiC power devices, it is necessary to reduce the peak current during the shutdown process by using pull-down resistors to protect the equipment and reduce electromagnetic interference.

Product Recommendation Maker Dynamics Applications

Product number： {{currentProduct.code}}

Product information： {{currentProduct.descCn}}

Order quantity： {{currentProduct.num}}

Cart （{{myCartItems.length}}Item）

Total amount：

{{isCn?'￥':'$'}}{{cartProductTotal}}