YAGEO auto patch resistor 1218 and 2512 series are two common auto patch resistor specifications. The following is an introduction to the selection parameters, brands and specifications of these two series:
1218 resistance selection
Resistance range: Depending on the specific model, usually between a few ohm and several hundred megohm.
Rated voltage: Depending on the model, it is usually between tens of volts and hundreds of volts.
Rated power: Depending on the specific model, usually between a few watts and tens of watts.
Temperature coefficient: Indicates the degree to which the resistance value changes with temperature, usually ±ppm/°C.
Brand: YAGEO (Yageo)
Specification: The size is 12mm x 18mm, which belongs to the larger chip resistance specification.
2512 resistance selection
Resistance range: Again depending on the specific model, covering a range from a few ohm to several hundred megohm.
Rated voltage: usually between tens of volts and hundreds of volts.
Rated power: Depending on the specific model, usually between a few watts and tens of watts.
Temperature coefficient: Also indicates the degree to which the resistance value changes with temperature, usually ±ppm/°C.
Brand: YAGEO (Yageo)
Specification: The size is 2.5mm x 1.2mm, which belongs to the smaller patch resistance specification.
YAGEO patch resistance selection suggestions
When choosing YAGEO automotive patch resistor 1218 and 2512 series, it is recommended to consider the following factors:
Resistance value requirements: According to the circuit design requirements, select the appropriate resistance value.
Power requirements: According to the current and voltage in the circuit, choose the power that can be tolerated.
Temperature coefficient: Select a resistance with a smaller temperature coefficient as needed to improve the stability of the circuit.
Package size: Select the appropriate package size according to the space and layout requirements on the board.
