HNST WELCOME! 0755-23173910
English /中文
你当前的浏览器版本过低或不支持。请升级或更换浏览器。推荐浏览器 Chrome Edge。

NXP TEA1723DT is a small, low-cost switch mode power supply (SMPS) controller IC suitable for low-power applications (up to 11 W) and can directly operate with a rectified mains power supply. It is designed for 11W AC-DC controllers with integrated power switches. This device integrates a high voltage power switch (700 V) and is optimized for flyback converter topology, which can improve efficiency over the full load range with extremely low no-load power consumption. The device is equipped with a built-in startup circuit, which can be directly started using rectified mains voltage without the need for any external discharge circuit. A hiccup frequency of 1270 Hz can achieve no-load power consumption below 35 mW under high mains input conditions.

NXP is suitable for the 11W AC-DC controller TEA1723DT with integrated power switch:

  • Low power switching power supply controller, suitable for applications with a power of up to 11 W
    Adopting a 700 V high-voltage power switch, suitable for operation under global mains power
    The output voltage is controlled through primary detection, without the need for optocouplers or secondary feedback circuits
    Minimize audio noise in various working modes to the greatest extent possible
    Compliant with Energy Star 2.0 standards
    Equipped with frequency jitter function and lower EMI
    No load power consumption below 35 mW
    Provide energy-saving mode with extremely low power supply current consumption under no-load conditions
    The current consumption of the built-in high-voltage starting circuit during normal switch operation is zero
    Adopting SO7 packaging that is halogen-free and compliant with RoHS standards
    The feedback control pin (FB) has overvoltage protection (OVP) and automatic restart function after protection
    The IC power pin has undervoltage lockout (UVLO) protection function
    Over temperature protection (OTP)
    By reducing the peak current at zero and low output voltages, soft start is achieved
    The demagnetization protection function ensures operation in discontinuous conduction mode
    The feedback control (FB) pin has open circuit and short circuit protection functions

  • NXP is suitable for the 11W AC-DC controller TEA1723DT with integrated power switch:
    White goods
    Industry
    smart meter 
    Smartphone and media tablet chargers
    universal adapter

Brand

Product Recommendation

Recommend Article