Introduction to SUSUMU Brand of KRL Series Short Edge Electrode Metal Foil Resistance

The KRL series short edge electrode metal foil resistors, also known as ordinary pad metal film mount resistors, are high-end resistor manufacturers from Japan. The KRL series short edge electrode metal foil resistors have high reliability, high temperature resistance, and other characteristics, with a main resistance value of ≤ 500mR (milliohms). They play a role in current detection and current acquisition in circuits, This article focuses on introducing the main parameters and characteristics of the KRL series short edge electrode metal foil resistance.

The main characteristics of KRL series short edge electrode metal foil resistors are as follows:

1. It can detect the low resistance value of high current, and the short side electrode chip resistance

2. You can choose between heat-resistant products (with temperatures up to 175 ℃) and low electromotive force products (with temperatures up to 155 ℃)

3. There is a wide variety of products that can cover high current and wide rated power

4. Wide volume selectivity

5. High rated power: 0.2W~5W

6. Electrodes can be selected: bottom electrode or high electrode

7. Compliant with automotive and testing standards: AEC-Q200

8. Low inductance (non inductive resistance)

The main characteristics of KRL series short edge electrode metal foil resistors are as follows:

1. Automotive related products

2. Various power sources and power converters

3. Motors, frequency converters, and industrial automation equipment

The main parameters of the KRL series short edge electrode metal foil resistance are as follows:

The external dimensions of the KRL series short edge electrode metal foil resistance are shown below:

Load attenuation curve of KRL series short edge electrode metal foil resistance:

" width="600" height="394" />