AEM fuse brand products have been certified by VDE, UL, PSE, KC and other countries, and have points of sale all over the world. The brand fuse has 2410 encapsulated, square patch fuse, vehicle fuse such as type, the fuse has overcurrent protection, overvoltage protection function, can avoid electronic equipment due to overcurrent, overvoltage damage, such as QF1206 is a common in automotive electronic control unit, mainly control the engine control module (ECM) or powertrain control module (PCM) current.
AEMQF1206 Patch fuse has high temperature resistance, high stress and high safety. The fuse built-in design is adopted to avoid excellent thermal and mechanical properties of energy leakage during fuse working temperature: -55 C to 150 C 100% lead free, no halogen free, fully meet the environmental requirementsAEMQF1206 Vehicle fuse is an important component to protect the vehicle circuit system, which has the function of preventing current overload and short circuit. When an overload or short circuit fault occurs in the vehicle circuit, the fuse will quickly cut off the current to protect the vehicle circuit system from damage. In addition, the vehicle fuse also has the advantages of small size, convenient installation, safety and reliability, and is one of the indispensable important components of modern vehicles. Compared with other types of fuses, vehicle fuses have higher safety performance and longer service life, which can effectively protect the safety of vehicle circuit system and drivers and passengers. The selection of appropriate vehicle fuse is very important for the protection and safety of vehicle circuit system.
AEMQF1206 Working principle of the fuse, when the current in the circuit exceeds the set value, the fuse will automatically disconnect the circuit, so as to prevent the circuit from overheating or damage, to ensure the safety of the vehicle. The fuse works based on the physical properties of the metal. The fuse is made of fine metal wires that are conductive under normal circumstances. However, when the current is too large, the fuse blows off due to the thermal effect, thus cutting off the circuit. This process is automated and performed without manual intervention. When the fuse is fused, a new fuse needs to be replaced. The vehicle fuse is usually mounted in the safety box of the vehicle for the driver to replace it. In addition to the fuse, modern vehicles are equipped with other safety protection devices, such as circuit protectors, relays, to ensure the safe and stable operation of the vehicle.
