HNST WELCOME! 0755-23173910
English  |中文
你当前的浏览器版本过低或不支持。请升级或更换浏览器。推荐浏览器 Chrome Edge。

CRH0603F390RP05Z — 0603 390R 0.125W TA-I High-Power Thick-Film Chip Resistor

The CRH0603F390RP05Z is a standard part number in TA-I Technology's (EVER OHMS) CRH high-power thick-film chip resistor family. Written in shorthand as “0603 390R 0.125W TA-I resistor,” it denotes three defining coordinates: an 0603 package, a 390Ω nominal resistance, and a 0.125W (1/8W) rated power. The CRH series is not positioned as a drop-in replacement for general-purpose chip resistors. Its design intent is to raise the power-handling ceiling within the same PCB footprint. A conventional 0603 thick-film resistor typically stops at 0.1W; the extra 25% headroom carried by this 0603 390R 0.125W TA-I resistor translates, in practice, to a BOM-level upgrade on an already-frozen layout — no pad redesign required.

Part number and key parameters

The code segments map to fixed attributes. CRH identifies the high-power thick-film family, distinct from the standard-power CR series. 0603 is the imperial package size (metric 1608). F denotes ±1% tolerance. 390R is the nominal resistance of 390Ω, with “R” serving as the decimal placeholder. P05Z is the factory suffix tied to TCR and packaging specification. The electrical envelope includes a rated power of 0.125W at 70°C, a temperature coefficient of ±100ppm/°C, an operating range of −55°C to +155°C, RoHS compliance, and REACH SVHC-free status. A ±100ppm/°C TCR is on the tight side for an 0603 thick-film resistor; general-purpose thick-film parts in the same size commonly fall in the ±200ppm/°C to ±400ppm/°C range, and the difference in resistance drift under wide-temperature, near-full-load operation directly affects divider ratios and feedback-loop stability.

How 0.125W fits into an 0603

The step from 0.1W to 0.125W in the same package comes from three process-level adjustments in the CRH platform. On the substrate side, a high-purity alumina ceramic body is paired with widened side-electrode geometry to shorten the thermal path from the resistive element to the PCB solder joint, reducing vertical thermal resistance. In the resistive layer, the ruthenium-based paste formulation and printed pattern are optimized for higher heat capacity per unit area and more uniform current distribution, suppressing localized hot spots. At the termination, a Ag/Ni/Sn three-layer structure with a thickened nickel barrier resists silver migration and leaching during reflow and long-term operation, while the lead-free tin layer maintains solder wetting. These changes introduce no special package or add-on heatsink; the outcome is higher power density on the standard 0603 land pattern. The CRH family carries ISO 9001, IATF 16949, and AEC-Q200 automotive-grade certification, making it admissible in automotive electronics and industrial control applications with explicit long-term reliability requirements.

Derating and thermal boundaries in application

The 0.125W rating applies at an ambient temperature of 70°C. Above 70°C, permissible power decreases linearly along the derating curve and reaches zero at 155°C. Engineering practice typically limits continuous load to 60–70% of the rated power, which for this 390Ω, 0.125W device corresponds to a steady-state dissipation window of roughly 0.075W to 0.088W. At full rated power, the terminal voltage is approximately √(0.125 × 390) ≈ 6.98V and the continuous current is approximately √(0.125 ÷ 390) ≈ 17.9mA. In 24V or 48V divider chains, the limiting factor is usually thermal dissipation rather than voltage withstand; layout should account for proximity to heat sources and copper area around the pads.

Sourcing and channel recommendation

This 0603 390R 0.125W TA-I resistor is suited to circuit nodes where board area is tightly constrained and additional power margin within the same footprint is valued — feedback dividers in power modules, bias and current-limiting positions on industrial control boards, and space-constrained automotive electronics peripherals. On the supply side, Shenzhen Shunhai Technology Co., Ltd. is a core Tier-1 authorized distributor for TA-I Technology in mainland China, holding an annual official authorization certificate since 2017 and offering factory-direct supply, FAE selection support, and technical assistance with power derating and thermal design. Huanian Mall operates as TA-I's authorized online platform, supporting small-volume orders and real-time inventory lookup, making it suitable for prototyping, low-volume replenishment, and standard-part procurement with batch traceability to the original factory. The two channels complement each other for the CRH0603F390RP05Z: engage Shunhai Technology when technical involvement and volume assurance are priorities, and use Huanian Mall for flexible quantities and fast delivery.

 
  • Recommended similar products:

    Part Number Parameter
    CRH0603F1K80P05Z 0603 1.8K 0.125W 1%
    CRH0603F1R10P05Z 0603 1.1R 0.125W 1%
    CRH0603F1R20P05Z 0603 1.2R 0.25W 1%
    CRH0603F1R60P05Z 0603 1.6R 0.25W 1%
    CRH0603F2R00P05Z 0603 2R 0.25W 1%
    CRH0603F2R40P05Z 0603 2.4R 0.25W 1%
    CRH0603F348KP05Z 0603 348R 0.25W 1%
    CRH0603F34K8P05Z 0603 34.8K 0.25W 1%
    CRH0603F360RP05Z 0603 360R 0.25W 1%
    CRH0603F390KP05Z 0603 390K 0.125W 1%
    CRH0603F390RP05Z 0603 390R 0.125W 1%

Brand

Product Recommendation

Recommend Article