JD-BZT52C2V4S-43S Industrial Electronic Co. Ltd-HNST

Series image: for reference only

Manufacturer：	JD
Product Series：	BZT52C2V4S-43S
Product Type：	Zener Diodes
EU RoHS：	Compliant(2011/65/EU)
EU REACH：	Dose not contain REACH SVHC(1907/2006/EC)
Power Dissipation：	200mW
Forward Voltage IF-10mA ：	VF:0.9V
Operating And Storage Temperature：	-55~+150℃
SPQ：	3000PCS/REEL
	View more
	Retract

Data Sheet：

JD_SOD323.pdf

Export Page to PDF

Specification

Reset

Are Zener diodes and Zener diodes the same thing? Yes, Zener diodes and Zener diodes refer to the same semiconductor device. They are two different names for the same thing.
What are the certification standards for fuses? The certification execution standard system for fuses is diversified according to different application fields and regional market requirements, mainly covering scenarios such as automotive electronics, intrinsic safety equipment, general electronics, and specific industry applications. The following is a classification analysis and key points of the core certification standards:
Why are all fuses UL certified? You said 'all fuses have UL certification', which is not entirely accurate, but it does reflect the extremely important position and high popularity of UL certification in the fuse field. The reasons are as follows:
How to reduce the risk of fuse failure? The core of reducing the risk of fuse failure lies in correct selection, standardized installation, use of qualified products, consideration of environmental factors, and regular maintenance. The following are specific strategies:
What are the consequences of fuse failure? Fuse failure is mainly divided into two completely different situations, each of which leads to completely different consequences and is very serious:
Will the fuse fail? Yes, fuses do indeed fail. Although they are designed as reliable and predictable fuse elements, in some cases they may not function as expected, resulting in failure.
What are the classifications of surface mount capacitors? There are many types of SMD capacitors, which can be classified in various ways. The following are several main classification perspectives and their common types:
Why is it that when the capacitance value of a surface mount capacitor exceeds 1UF, the direct testing results in a lower capacitance? The phenomenon of low capacitance of surface mount capacitors (especially MLCC) when tested directly with a capacity of over 1uF is usually caused by the following key factors:
What is the storage time of capacitors The storage time of capacitors is significantly affected by the type, storage conditions, and packaging process, with significant differences among different types. The following is a storage guide that integrates the characteristics of various capacitors:
How to prevent capacitor breakage during production? Capacitor breakage is a common problem in electronic production, especially in ceramic capacitors (MLCC), which can lead to early product failure or reduced reliability. Preventing and controlling capacitor breakage requires comprehensive management from multiple aspects such as design, materials, processes, equipment, operation, and environment. Here are some key prevention and control measures:
Why are surface mount capacitors prone to breakage or terminal detachment? Surface mount capacitors (especially multi-layer ceramic capacitors - MLCC) are prone to breakage or terminal detachment, mainly due to their own structure, material properties, and the combined effect of external stress. The following are the main reasons:
Do capacitors have polarity? Capacitors can have polarity or not, depending on the type and internal structure of the capacitor.
What are the intuitive manifestations of capacitor failure? The intuitive manifestations of capacitor failure are diverse, depending on the type of capacitor, its role in the circuit, and the severity of the failure. Here are some of the most common intuitive expressions that can be discovered through observation or simple operation:
How to remedy a capacitor failure? After discovering a capacitor failure, the core remedial measure is to replace the faulty capacitor. This is a process that requires careful handling, especially when dealing with high voltage or precision equipment.
What are the effects of capacitor failure on the circuit? The impact of capacitor failure on circuits is extensive and severe, depending on the role of the capacitor in the circuit, failure modes (open circuit, short circuit, reduced capacity, increased ESR, increased leakage current, etc.), and the design of the circuit itself. Here are some of the main impacts:
What are the reasons for capacitor failure? There are various reasons for capacitor failure, which can be mainly attributed to the following categories:
What rules should be followed for capacitor selection? Capacitor selection is a crucial step in circuit design, as improper selection may lead to poor circuit performance, decreased reliability, or even failure. The following are the key rules and considerations that need to be followed:
What are the consequences of resistor failure? The consequences of resistor failure are diverse, depending on the function of the resistor in the circuit, failure mode, circuit design, and severity of the failure. The following are some of the main consequences, ranging from minor functional abnormalities to severe equipment damage and even safety hazards:
What are the manifestations of resistor failure? The performance of surface mount resistors after failure is diverse, depending on the root cause of the failure. The following are common failure manifestations and their corresponding possible causes:
What are the methods to prevent resistor failure? Preventing resistor failure is a crucial step in ensuring the reliable operation of electronic devices. Here are some systematic methods and strategies, starting from design selection, production process, to usage and maintenance:
What are the reasons for resistance aging? There are various reasons for resistor failure, which can be summarized into the following main categories:
Where is the way out for component agents? Under the multiple challenges of payment term pressure, spot price fluctuations, and original factory order grabbing, electronic component agents can build core competitiveness and achieve sustainable development through the following strategies:
Where is the way out for component stores in the current environment? In the current market environment, the key directions for electronic component stores can be summarized as follows:
What are the advantages of purchasing electronic components in Huanian Mall In the Chinese New Year Shopping Mall (website: [www.hnsts hop. com])（ http://www.hnstshop.com ））Purchasing electronic components can bring the following core advantages to engineers, R&D teams, and enterprise users, taking into account their product, service, technical support, and supply chain capabilities. The specific benefits are as follows:
What rules should be followed when selecting resistors? The selection of resistors may seem simple, but it actually involves multiple key factors. Choosing the wrong one may lead to a decrease in circuit performance, heating, or even failure. The following are systematic rules and considerations for selecting resistors:
Why do some thick film surface mount resistors now require safety certification As a basic electronic component, ordinary thick film surface mount resistors have increasingly needed to meet safety certification requirements in recent years. This trend is mainly driven by the following core factors, reflecting profound changes in the electronic industry in terms of safety, regulations, and technology:
2512 0.082R (82mR) 3W EMA25F3W0R082MDG alloy resistor Ellon brand introduction EMA25F3W0R082MDG is a 2512 encapsulated alloy resistor produced by ENOMOTO company. The following is a detailed description of it:
Introduction to SUNWAY SP2512FR082E3WPKH 2512 0.082R (82mR) 3W Alloy Resistance The following is a detailed technical description of the SP2512FR082E3WPKH Xinwei alloy resistor, compiled based on its parameter characteristics, application scenarios, and manufacturer background information:
2512 0.082R 3W alloy resistor model and recommended supplier for purchase Based on your requirements (2512 package, 0.082 Ω/82m Ω resistance, 3W power alloy resistor), I have compiled the following brand models and purchasing channel information. Although the search results do not directly list models with resistance values that completely match 0.082 Ω, the alloy resistor series of the following brands cover a similar resistance range (such as 0.5m Ω -100m Ω), and support 2512 package and 3W power, which can be customized or selected to meet the needs.
Why do fuses need to undergo safety certification? The reason why fuses must pass safety certification (such as UL, IEC, CCC, etc.) is crucial, mainly based on the following core factors:

Related Series