HNST WELCOME! 0755-23173910
English /中文
你当前的浏览器版本过低或不支持。请升级或更换浏览器。推荐浏览器 Chrome Edge。

CONQUER square fuse series MSF, MMT and MST three series have a wide range of applications in the field of circuit protection, below, we Shunhai technology will through several specific application case analysis, to further understand the performance of these fuses in practical applications, hope to help you, convenient selection and increase fuse knowledge.

功得MSF/MMT/MST方形保险丝选建议与应用分析

MSF series fuse application case

For example, the electronic equipment manufacturer wants to produce a smart speaker, its internal circuit uses the MSF series fuse to protect, the speaker's rated power is 50W, the working voltage is DC24V, the working ambient temperature range is -10℃ ~ +50℃. After careful selection, you can choose the MSF series of fuses with a rated current of 3.15A and a rated voltage of DC/AC250V. In practical application, the fuse can effectively protect the speaker circuit from the damage of short circuit and overload, and ensure the normal operation of the speaker.

MMT series fuse application case

For example, in the PLC (programmable logic controller) equipment produced by an industrial automation enterprise, MMT series fuses are used for circuit protection. The input voltage of the device ranges from AC100V to 240V, and the operating temperature ranges from 0 ° C to +40 ° C. The MMT series fuses with a rated current of 1.6A and a rated voltage of AC250V can be selected to take into account the risks of power fluctuations and short circuits that the equipment may face. In practical applications, the fuse can quickly cut off abnormal current and effectively protect PLC equipment from damage.

MST series fuse application case

For example, a new energy vehicle manufacturer uses MST series fuses for protection in its electric vehicle charging system. The input voltage of the charging system is AC220V, the output voltage is DC400V, and the maximum charging current is 8A. Due to the high safety and reliability requirements of electric vehicle charging systems, manufacturers can choose MST series fuses with a rated current of 10A and rated voltage of AC500V. In practical applications, the fuse can quickly cut off the current when the charging system is abnormal, ensuring the safety of electric vehicles and charging equipment.

Brand

Product Recommendation

Recommend Article