HNST WELCOME! 0755-23173910
English /中文
你当前的浏览器版本过低或不支持。请升级或更换浏览器。推荐浏览器 Chrome Edge。

The Fenghua (FH) alloy resistance MG series belongs to pure metal alloy resistance, which has strong impact resistance, high current, good heat dissipation performance, ultra-low inductance<5.0nH, low TCR value ≤ ± 50ppm/℃, and wide selectivity in resistance and volume. This article provides a detailed introduction to the characteristics and product parameters of the Fenghua alloy resistance MG series.


The main product characteristics of the Fenghua (FH) pure metal alloy resistance MG series are as follows:

1. High power: The maximum power can reach 7W

2. Low TCR: can reach a minimum of ± 50ppm/℃

3. Low parasitic inductance less than 5 nanohertz

4. Adapt to reflow soldering and wave soldering

5. Low assembly cost and matching with automatic mounting equipment

6. Suitable as a resistor for current detection, such as power circuits, etc

7. High mechanical strength and superior high-frequency characteristics

8. Compliance with directive requirements

9. Tidal sensitivity level: MSL 1

10. Adapt to reflow soldering and wave soldering

11. Suitable as a resistor for current detection, such as power circuits, etc

12. High mechanical strength and superior high-frequency characteristics

 


The product selection parameters for the Fenghua (FH) pure metal alloy resistance MG series are as follows:

The above are the main product selection parameters for the Fenghua (FH) pure metal alloy resistance MG series. If you need more detailed product information and product ordering, please consult online customer service.

 

Brand

Product Recommendation

Recommend Article